How much can CEPA save on steel l sections (angles), hot-rolled, height under 80 mm?

On a CIF value of ₹10,00,000, total duty falls from ₹3,74,700 (MFN) to ₹1,80,000 (CEPA) — about ₹1,94,700 saved per shipment, scaling with consignment value.

What do I need to claim the CEPA rate on steel l sections (angles), hot-rolled, height under 80 mm?

A valid preferential Certificate of Origin (eCoO 2.0) proving UAE origin under the Rules of Origin. Without it, customs charges the 15% MFN rate.

Import duty on Steel L sections (angles), hot-rolled, height under 80 mm (HS 72162100) from the UAE to India

HS 72162100 · UAE to India · ANGLES

Data last updated: 10 August 2026 · MFN duty & IGST verified against ICEGATE (Indian Customs EDI). CEPA preferential rate per the India–UAE CEPA schedule. Verify your exact HS line before filing.

Duty breakdown on a ₹10,00,000 shipment

Component	Standard (MFN)	CEPA
Basic customs duty	₹1,50,000	₹0
Social Welfare Surcharge	₹15,000	₹0
IGST	₹2,09,700	₹1,80,000
Total duty	₹3,74,700	₹1,80,000

CEPA duty saving on this example: ₹1,94,700 . Run your own numbers in the import-duty estimator.

What drives the rate

Importing steel l sections (angles), hot-rolled, height under 80 mm (HS 72162100) from the UAE to India attracts a standard MFN basic customs duty of 15%. Under the India–UAE CEPA the preferential basic customs duty is 0%. On a sample assessable value of ₹10,00,000, total duty falls from ₹3,74,700 at the MFN rate to ₹1,80,000 with CEPA — a saving of ₹1,94,700 per shipment. Steel angle is among the most widely used structural products in Indian construction and fabrication, from towers to shelving to general engineering. CEPA removes the full 15% basic duty. The 40% value-content rule depends on melt-and-roll origin, and the section trade is heavily exposed to trade-remedy measures that operate independently of CEPA. Because angle is a commodity bought largely on price, the duty differential frequently decides the order — but only if the origin claim survives. Screen for live measures, verify the mill origin, and file the Certificate of Origin. Social Welfare Surcharge adds 10% on the basic duty and 18% IGST applies on top — though IGST is recoverable as input tax credit, so the lasting benefit is the basic-duty saving. Always confirm the live rate for HS 72162100 on ICEGATE or CBIC before filing.

Import compliance & clearances

Beyond duty, importing steel l sections (angles), hot-rolled, height under 80 mm (HS 72162100) into India requires the following regulatory clearances. The CEPA preferential rate does not waive any of these — they apply regardless of origin.

DGFT Valid IEC (Importer-Exporter Code) required; ITC(HS) import policy: Free source ↗

Indicative and non-exhaustive — verify the current DGFT / BIS / FSSAI / CDSCO notification for your exact 8-digit HS line before importing. Not customs or legal advice.

Frequently asked questions

What is the import duty on steel l sections (angles), hot-rolled, height under 80 mm from the UAE to India?: The standard MFN basic customs duty is 15%; under India–UAE CEPA the preferential rate is 0%. SWS adds 10% on the basic duty and 18% IGST applies on the CIF + BCD + SWS base.
How much can CEPA save on steel l sections (angles), hot-rolled, height under 80 mm?: On a CIF value of ₹10,00,000, total duty falls from ₹3,74,700 (MFN) to ₹1,80,000 (CEPA) — about ₹1,94,700 saved per shipment, scaling with consignment value.
What do I need to claim the CEPA rate on steel l sections (angles), hot-rolled, height under 80 mm?: A valid preferential Certificate of Origin (eCoO 2.0) proving UAE origin under the Rules of Origin. Without it, customs charges the 15% MFN rate.