Import duty on steel hinges for furniture, doors and buildings from Dubai (UAE) to India
HS 83021010 · Dubai / UAE → India · BASE METAL MOUNTINGS
Data last updated: · MFN duty & IGST verified against ICEGATE (Indian Customs EDI). CEPA preferential rate per the India–UAE CEPA schedule. Verify your exact HS line before filing.
Duty breakdown on a ₹10,00,000 shipment
Enter your own value to recalculate the table below.
| Component | Standard (MFN) | CEPA |
|---|---|---|
| Basic customs duty | ₹1,50,000 | ₹0 |
| Social Welfare Surcharge | ₹15,000 | ₹0 |
| IGST | ₹2,09,700 | ₹1,80,000 |
| Total duty | ₹3,74,700 | ₹1,80,000 |
CEPA duty saving on this example: ₹1,94,700 . Run your own numbers in the import-duty estimator. New to BCD, SWS and IGST? See the glossary.
How this duty changes, year by year
India's schedule of tariff concessions (CEPA Annex 2A) sets a preferential rate for each of ten years, not one permanent figure. For HS 83021010 the modality is TEP over 5 years, reaching zero in 2026.
| Year | 2022 | 2023 | 2024 | 2025 | 2026now | 2027 | 2028 | 2029 | 2030 | 2031 |
|---|---|---|---|---|---|---|---|---|---|---|
| CEPA BCD | 12% | 9% | 6% | 3% | 0% | 0% | 0% | 0% | 0% | 0% |
Rates as published in India's schedule; the agreement entered into force on 1 May 2022, so Year 1 is 2022. CEPA Annex 2A
What drives the rate
Importing steel hinges for furniture, doors and buildings (HS 83021010) from the UAE to India attracts a 15% MFN basic customs duty, and the India–UAE CEPA preferential rate is 0%. Steel hinges are a high-volume builders'-hardware line feeding construction, furniture manufacture and the retail hardware trade. CEPA removes the basic duty — a large cut for a commodity component. The 40% value-content rule applies to the stamped and finished part, and much of this category is Asian production distributed through the UAE, which does not confer origin however long the stock has been warehoused. Furniture and hardware importers often buy mixed hardware consignments, so split the CEPA claim by line rather than applying it across the invoice, and support each line with the maker's declaration naming the plant. One non-qualifying SKU on a blanket claim puts the qualifying lines at risk alongside it. Compare with the brass hinge line, which carries the same duty path but a different manufacturing question — plating imported blanks rarely reaches the threshold, while stamping and forming from coil does. The rate is on a published staircase, not a fixed number: Annex 2A takes this line from 12% in 2022 to zero in 2026 — TEP over 5 years — with 0% the rate for 2026. A supply contract signed across that boundary is worth pricing against the later rate. The preference is worth 16.5% of assessable value on every consignment — the 15-point basic-duty gap plus the 10% Social Welfare Surcharge that rides on it — so it scales with shipment size rather than with effort, and the Certificate of Origin costs the same either way. Social Welfare Surcharge adds 10% on the basic duty, not on the goods, and IGST of 18% then applies to the CIF + BCD + SWS total — IGST is recoverable as input tax credit, so the durable benefit is the basic duty alone. Confirm the live rate on ICEGATE before filing; ₹10,00,000 is only the worked example above.
Import compliance & clearances
Beyond duty, importing steel hinges for furniture, doors and buildings (HS 83021010) into India requires the following regulatory clearances. The CEPA preferential rate does not waive any of these — they apply regardless of origin.
- DGFT Valid IEC (Importer-Exporter Code) required; ITC(HS) import policy: Free source ↗
Indicative and non-exhaustive — verify the current DGFT / BIS / FSSAI / CDSCO notification for your exact 8-digit HS line before importing. Not customs or legal advice.
Frequently asked questions
- What is the import duty on steel hinges for furniture, doors and buildings from the UAE to India?
- The standard MFN basic customs duty is 15%; under India–UAE CEPA the preferential rate is 0%. SWS adds 10% on the basic duty and 18% IGST applies on the CIF + BCD + SWS base.
- How much can CEPA save on steel hinges for furniture, doors and buildings?
- On a CIF value of ₹10,00,000, total duty falls from ₹3,74,700 (MFN) to ₹1,80,000 (CEPA) — about ₹1,94,700 saved per shipment, scaling with consignment value.
- What do I need to claim the CEPA rate on steel hinges for furniture, doors and buildings?
- A valid preferential Certificate of Origin (eCoO 2.0) proving UAE origin under the Rules of Origin. Without it, customs charges the 15% MFN rate.