Does fuses for switches rated above 15 amps, high rupturing capacity qualify for India–UAE CEPA?

Yes, if it meets the Annex 3B Product-Specific Rule "CTH + VA 40% (CEPA Annex 3B Product-Specific Rule; tariff-shift AND value addition both required).": it must BOTH change tariff classification (CTH) AND add at least 40% regional value content — both conditions are required, not either/or.

What proof is needed at import?

A preferential Certificate of Origin filed through eCoO 2.0, presented at customs before clearance. Without it, the 10% MFN duty applies.

Fuses for switches rated above 15 amps, high rupturing capacity (HS 85361020) under India–UAE CEPA

HS 85361020 · ELECTRICAL APPARATUS FOR SWITCHING OR PROTECTING ELECTR · Rules of Origin & preferential rate

Data last updated: 10 August 2026 · MFN duty & IGST verified against ICEGATE (Indian Customs EDI). Rules of Origin per CEPA Annex 3B. Verify your exact HS line before filing.

CEPA eligible: Yes
Value addition (RVC): 40%
Tariff-classification change: CTH
MFN → CEPA basic duty: 10% → 0%

Rule of Origin (CEPA Annex 3B, primary source): CTH + VA 40% (CEPA Annex 3B Product-Specific Rule; tariff-shift AND value addition both required).

Qualifying under the Rules of Origin

To claim the CEPA preference on fuses for switches rated above 15 amps, high rupturing capacity (HS 85361020), the goods must qualify as UAE-originating: the Product-Specific Rule (Annex 3B) is "CTH + VA 40% (CEPA Annex 3B Product-Specific Rule; tariff-shift AND value addition both required).": the goods must undergo a change of tariff heading (CTH) AND add at least 40% regional value content — both conditions, not either/or. HRC fuses protect industrial and commercial distribution boards where fault currents are high, a technical component with steady demand from panel builders. CEPA removes the 10% basic duty. Qualification turns on the 40% value-content rule; fuse elements and ceramic bodies are usually imported, so UAE assembly alone may fall short. BIS and IEC-aligned certification apply and panel builders will demand test certificates regardless of the duty route. Keep the origin declaration and the type-test certificates in one pack — customs and the customer are asking different questions about the same consignment. A valid Certificate of Origin filed through the eCoO 2.0 system must accompany the shipment; without it, customs charges the 10% MFN rate instead of the preference.

Check your own figures in the Rules of Origin (RVC) qualifier.

Frequently asked questions

Does fuses for switches rated above 15 amps, high rupturing capacity qualify for India–UAE CEPA?: Yes, if it meets the Annex 3B Product-Specific Rule "CTH + VA 40% (CEPA Annex 3B Product-Specific Rule; tariff-shift AND value addition both required).": it must BOTH change tariff classification (CTH) AND add at least 40% regional value content — both conditions are required, not either/or.
What is the Rule of Origin for fuses for switches rated above 15 amps, high rupturing capacity?: Per CEPA Annex 3B: CTH + VA 40% (CEPA Annex 3B Product-Specific Rule; tariff-shift AND value addition both required).. RVC% = [(FOB − value of non-originating materials) / FOB] × 100 (FOB basis).
What proof is needed at import?: A preferential Certificate of Origin filed through eCoO 2.0, presented at customs before clearance. Without it, the 10% MFN duty applies.