Import duty on cast-iron pans, not enamelled from Dubai (UAE) to India
HS 73239110 · Dubai / UAE → India · TABLE
Data last updated: · MFN duty & IGST verified against ICEGATE (Indian Customs EDI). CEPA preferential rate per the India–UAE CEPA schedule. Verify your exact HS line before filing.
Duty breakdown on a ₹10,00,000 shipment
Enter your own value to recalculate the table below.
| Component | Standard (MFN) | CEPA |
|---|---|---|
| Basic customs duty | ₹2,00,000 | ₹0 |
| Social Welfare Surcharge | ₹20,000 | ₹0 |
| IGST | ₹2,19,600 | ₹1,80,000 |
| Total duty | ₹4,39,600 | ₹1,80,000 |
CEPA duty saving on this example: ₹2,59,600 . Run your own numbers in the import-duty estimator. New to BCD, SWS and IGST? See the glossary.
What drives the rate
Importing cast-iron pans, not enamelled (HS 73239110) from the UAE to India attracts a 20% MFN basic customs duty, and the India–UAE CEPA preferential rate is 0%. Non-enamelled cast-iron cookware has grown well beyond a niche as Indian consumers move toward durable and traditional cooking surfaces. CEPA removes the 20% basic duty — a large cut for a consumer line, which makes the origin diligence proportionate rather than optional. The 40% value-content rule turns on where the iron was cast and finished; a UAE finisher seasoning or coating imported castings may fall well short, because casting is where the value sits. The Steel Quality Control Orders apply to this chapter, requiring BIS certification of the producing mill before clearance. Food-contact compliance and packaged-commodity labelling under the Legal Metrology Act then apply independently of duty, and the labelling has to be printed at origin rather than applied at the port. Given the 20% differential, verify the foundry location in writing rather than accepting a regional invoice as evidence of origin — a failed claim on that gap is an expensive correction. India's schedule (Annex 2A, modality TEI) took this line to zero in the agreement's first year, 2022, so the preference is fully phased in and nothing further changes. The preference is worth 22% of assessable value on every consignment — the 20-point basic-duty gap plus the 10% Social Welfare Surcharge that rides on it — so it scales with shipment size rather than with effort, and the Certificate of Origin costs the same either way. Social Welfare Surcharge adds 10% on the basic duty, not on the goods, and IGST of 18% then applies to the CIF + BCD + SWS total — IGST is recoverable as input tax credit, so the durable benefit is the basic duty alone. Confirm the live rate on ICEGATE before filing; ₹10,00,000 is only the worked example above.
Import compliance & clearances
Beyond duty, importing cast-iron pans, not enamelled (HS 73239110) into India requires the following regulatory clearances. The CEPA preferential rate does not waive any of these — they apply regardless of origin.
- DGFT Valid IEC (Importer-Exporter Code) required; ITC(HS) import policy: Free source ↗
- BIS Steel and steel products fall under the Steel Quality Control Orders — BIS certification of the producing mill is required, and consignments from an uncertified mill are refused clearance. source ↗
Indicative and non-exhaustive — verify the current DGFT / BIS / FSSAI / CDSCO notification for your exact 8-digit HS line before importing. Not customs or legal advice.
Frequently asked questions
- What is the import duty on cast-iron pans, not enamelled from the UAE to India?
- The standard MFN basic customs duty is 20%; under India–UAE CEPA the preferential rate is 0%. SWS adds 10% on the basic duty and 18% IGST applies on the CIF + BCD + SWS base.
- How much can CEPA save on cast-iron pans, not enamelled?
- On a CIF value of ₹10,00,000, total duty falls from ₹4,39,600 (MFN) to ₹1,80,000 (CEPA) — about ₹2,59,600 saved per shipment, scaling with consignment value.
- What do I need to claim the CEPA rate on cast-iron pans, not enamelled?
- A valid preferential Certificate of Origin (eCoO 2.0) proving UAE origin under the Rules of Origin. Without it, customs charges the 20% MFN rate.